1. hepsiburada
  2. Bilgisayarlar
  3. Bilgisayar Aksesuarları
  4. Kablo Switch Çoklayıcılar
  5. Konnektor Penseler

Cisco SFP-10G-SR-S 10GBASE-SR (S-Class) Sfp+ Transceiver Module, Mmf 850NM

Cisco SFP-10G-SR-S 10GBASE-SR (S-Class) Sfp+ Transceiver Module, Mmf 850NM
Mağaza: hepsiburada
Son Fiyatı: 2898.00 TL

Benzer Ürünler

Satıcıdan aynı kategoride diğer ürünler

Tümü

Ürün bilgileri

Orginal Cisco SFP-10G-SR-S 10GBASE-SR (S-Class) SFP+ Transceiver Module, MMF 850nm Features and benefits The Cisco 10GBASE-SR module supports a link length of 26 meters on standard Fiber Distributed Data Interface (FDDI)-grade Multimode Fiber (MMF). Using 2000 MHz*km MMF (OM3), up to 300-meter link lengths are possible. Using 4700 MHz*km MMF (OM4), up to 400 meter link lengths are possible. SFP-10G-SR-S does not support FCoE. Main features of Cisco 10GBASE SFP+ modules include: ● Smallest 10G form factor ● Commercial temperature (0 to 70°C) only ● Supports 10GBASE Ethernet only ● Hot-swappable input/output device that plugs in to an Ethernet SFP+ port of Cisco platforms ● Provides flexibility of interface choice ● Supports digital optical monitoring capability ● Cisco quality identification (ID) feature that enables a Cisco platform to identify - optics supported by Cisco technology ● Optical interoperability with 10GBASE XENPAK, 10GBASE X2, and 10GBASE XFP interfaces on the same link Cisco SFP-10G-SR-S The Cisco 10GBASE-SR module supports a link length of 26 meters on standard Fiber Distributed Data Interface (FDDI)-grade Multimode Fiber (MMF). Using 2000 MHz*km MMF (OM3), up to 300-meter link lengths are possible. Using 4700 MHz*km MMF (OM4), up to 400 meter link lengths are possible. SFP-10G-SR-S does not support FCoE. Cisco SFP-10G-LR-S The Cisco 10GBASE-LR module supports a link length of 10 kilometers on standard single-mode fiber (SMF, G.652). SFP-10G-LR-S does not support FCoE. Technical specifications Connectors and cabling Connectors: Dual LC/PC connector (-SR, -LR, -ER, -ZR). Note: Only connections with patch cords with PC or Ultra-Physical Contact (UPC) connectors are supported. Patch cords with Angled Physical Contact (APC) connectors are not supported. All cables and cable assemblies used must be compliant with the standards specified in the standards section. Table 1 provides cabling specifications for the Cisco SFP+ modules. 1. SFP+ Port cabling specificationsCisco SFP+ Wavelength (nm) Cable Type Core Size (Microns) Modal Bandwidth (MHz*km)*** Cable Distance* Cisco SFP-10G-SR-S 850 MMF 62.5 62.5 50.0 50.0 50.0 50.0 160 (FDDI) 200 (OM1) 400 500 (OM2) 2000 (OM3) 4700 (OM4) 26m 33m 66m 82m 300m 400m Cisco SFP-10G-LR-S 1310 SMF G.652 - 10km * Minimum cabling distance for -SR, -LRM, -LR, -ER modules is 2 meters, according to the IEEE 802.3ae standard.

Fiyat Geçmişi